How Can We Help?
Don't hesitate to send a message！
Get in Touch
Product:
SRU200A 03054299 03030PGX
Model:
SRU200A 03054299 03030PGX WP22SRU200A5 Processing Unit controls and manages the system UGW9811
Description:
SRU200A 03054299 03030PGX WP22SRU200A5 Processing Unit (SRU) controls and manages the system UGW9811 UGW9811 use for PGP-X8
Price:
Regular price
$6,800.00 USD
Enterprise Firewall SRU200A 03054299 03030PGX WP22SRU200A5 Processing Unit (SRU) controls and manages the system UGW9811 use for PGP-X8 subrack CoreNetwork
A subrack is a mandatory device and houses UGW9811 boards, including the Switching Route Units (SRUs), Switching Fabric Units (SFUs), Service Processing Units (SPUs), and Line Processing Units (LPUs).
The UGW9811 supports PGP-16, PGP-X8, and PGP-X16 subracks
The Switch and Route Processing Unit (SRU) controls and manages the system, including calculating routes, performing device maintenance and management, and monitoring the device.
|
Item |
Description |
|---|---|
|
BOM code |
03054299 03030PGX (03030PGX is an earlier BOM number and identifies the same board as 03054299.) |
|
Dimensions (height x width x depth) |
36 mm x 520 mm x 400 mm (1.42 in. x 20.47 in. x 15.75 in.) |
|
Typical power consumption
NOTE:
It is the power consumption when the ambient temperature is 25°C (77°F) and the service traffic is 50% of the capacity. |
130 W |
|
Maximum power consumption
NOTE:
It is the power consumption when the ambient temperature is 50°C (122°F) and the service traffic is 100% of the capacity. |
160 W |
|
Heat dissipation |
160 W |
|
Weight |
5.3 kg (11.69 lb) |
|
Interface |
Connector Type |
Description |
|---|---|---|
|
USB interface |
USB |
It is used to connect a mass USB device that stores data files.
NOTE:
USB interfaces are reserved for later use. |
|
CTL-ETH-SFP interface (1000M Base-X) |
SFP |
It is reserved for capacity expansion. |
|
MGMT-ETH interface (10M/100M/1000M Base-TX auto-sensing) |
RJ45 |
It is used to connect the network management workstation and has LINK and ACT indicators. |
|
CONSOLE interface |
RJ45 |
It is used to connect the console for onsite system configuration. |
|
AUX interface |
RJ45 |
The AUX interface is unavailable. |
|
Attribute |
Description |
|---|---|
|
Connector type |
USB |
|
Working mode |
High-speed or full-speed mode |
|
Standard compliance |
USB 2.0 |
|
Cable specification |
Standard USB cables |